Toyota 4Runner: Trip information
Items displayed can be switched by pressing the “MODE/
” button.
Driving range
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining
• This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be
updated.
Average fuel consumption
Displays the average fuel consumption since the function was reset
• Pressing and holding the “SET/ 
”
button will reset the average fuel consumption.
• Use the displayed average fuel consumption as a reference.
Accessory meter
The accessory meter presents the driver with a variety of drivingrelated
data including the current outside air temperature.
1. “MODE/ ” button
2. “SET/ ” button
3. Trip information D ...
Accessory meter light control
The daytime brightness of the accessory meter can be adjusted.
Turn the headlight switch off.
Press and hold the “MODE/
” button.
Press the “MODE/
” or “SET/
” button.
Vehicles w ...
Other materials about Toyota 4Runner:
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)
(a) Remove the No. 1 roof silencer pad.
2. REMOVE NO. 2 ROOF SILENCER PAD
(a) w/o Sliding Roof:
Remove the 2 No. 2 roof silencer pads.
(b) w/ Sliding Roof:
Remo ...
Check Mode Procedure
CHECK MODE PROCEDURE
NOTICE:
Enter "Signal Check" from the "DTC Check" screen displayed on the Techstream
to clear the output DTCs (both present and past).
HINT:
DTCs can be stored more sensitively in check mode than in normal ...
0.007