PROCEDURE
1. |
CHECK CONDITION |
(a) Check if the system voice recognition level is low when recognizing a particular voice.
Result |
Proceed to |
---|---|
System voice recognition level is low with any voice. |
A |
System voice recognition level is low only for a particular voice. |
B |
HINT:
System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.
B |
END |
|
2. |
CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK) |
(a) Enter the "Microphone Check" screen. Refer to Check Microphone in Operation Check (See page ). |
|
(b) When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
OK:
Check result is normal.
OK |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
NG |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
BUS IC Communication Malfunction (B1497/97)
DESCRIPTION
The air conditioning harness assembly connects the No. 1 air conditioning amplifier
assembly and each servo motor. The No. 1 air conditioning amplifier assembly supplies
power and sends operation instructions to each servo motor through the ai ...
Side Auto Step LH Stowing Timeout (51-56)
DESCRIPTION
When fully deploying or stowing the automatic running board takes more than 4
seconds, or when the side auto step motor hall sensor pulse signal exceeds the maximum
pulse count, the side auto step ECU halts the operation of the automatic runni ...