Toyota 4Runner: Windshield wipers and washer
When intermittent windshield wiper operation is selected, the wiper interval can be adjusted.
The wiper operation is selected by moving the lever as follows.
Type A
1. 
Intermittent windshield wiper
operation
2. 
Low speed windshield wiper
operation
3. 
High speed windshield wiper
operation
4. 
Temporary operation
5. Increases the intermittent windshield wiper frequency 6. Decreases the intermittent windshield wiper frequency
7. Washer/wiper dual operation
The wipers will automatically operate a couple of times after the washer squirts.
Type B
1. 
Intermittent windshield wiper
operation
2. 
Low speed windshield wiper
operation
3. 
High speed windshield wiper
operation
4. 
Temporary operation
5. Increases the intermittent windshield wiper frequency 6. Decreases the intermittent windshield wiper frequency
7. Washer/wiper dual operation
The wipers will automatically operate a couple of times after the washer squirts.
The windshield wipers and washer can be operated when
Vehicles without a smart key system: The engine switch is in the “ON” position.
Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode.
If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir.
NOTICE
When the windshield is dry
Do not use the wipers, as they may damage the windshield.
When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may overheat.
When a nozzle becomes blocked
Do not try to clear it with a pin or other object. The nozzle will be damaged.
Fog light switch
The fog lights secure excellent visibility in difficult driving
conditions, such as in rain and fog.
Type A
1. Turns the front fog lights
off
2. Turns the front fog lights on
Type B
1. ...
Rear window wiper and washer
Before operating the rear window wiper and washer switch, make sure the back
window is completely closed. The wiper operation is selected by moving the
lever as follows:
Type A
1. Interm ...
Other materials about Toyota 4Runner:
Noise Occurs or Sound Skips when Portable Player Plays
CAUTION / NOTICE / HINT
HINT:
Perform this check with the portable player volume set at an appropriate
level.
Make sure that there are no obstructions between the portable player
and radio and display receiver assembly that may block sign ...
Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound signal from an external
device to the navigation receiver assembly via this circuit.
The sound signal that has been sent is amplified by the stereo component amplifier
assembly, and then ...
0.0267