Toyota 4Runner manuals

Toyota 4Runner: 1gr-fe Battery / Charging

Inspection
INSPECTION PROCEDURE 1. TRANSFER SYSTEM NOTICE: To shift from H2 to H4, move the transfer shift lever while keeping the wheels facing straight ahead. To shift from H4 to L4, stop t ...

Charging System
Precaution PRECAUTION 1. Check that the battery cables are connected to the correct terminals. 2. Disconnect the battery cables when the battery is given a quick charge. 3. Do not perform tests ...

Other materials about Toyota 4Runner:

Removal
REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system. NOTICE: When disconnecting the cable, some systems ne ...

Installation
INSTALLATION PROCEDURE 1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY (a) Install a new gasket and the differential carrier assembly with the 10 nuts and 10 washers. Torque: 52 N·m {530 kgf·cm, 38 ft·lbf} 2. INSTALL REAR AXLE SHAFT LH (a) Install t ...

© 2016-2020 | www.to4runner.net

0.003