Toyota 4Runner: Customize Parameters

Toyota 4Runner Service Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System / Customize Parameters

CUSTOMIZE PARAMETERS

1. METER/GAUGE SYSTEM

(a) Combination Meter

NOTICE:

Record the current settings before customizing.
When the customer requests a change in a function, first make sure that the function can be customized.

HINT:

The following items can be customized using the Techstream.

Warning

Tester Display	Default	Content	Setting
Driver Side Seatbelt Warning Buzzer*	ON	Function to turn on or off the seat belt warning buzzer	ON or OFF
Front Passenger Side Seatbelt Warning Buzzer*	ON	Function to turn on or off the seat belt warning buzzer	ON or OFF

*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

Display

Tester Display	Default	Content	Setting
ECO Drive Indicator Zone	ON	Function to enable or disable eco driving indicator zone display in the multi-information display	ON or OFF

System Diagram

SYSTEM DIAGRAM Terminal No. (Symbol) Wire Harness Side F14 1 (CANH) CAN communication line (V Bus) 2 (CANL) ...

Operation Check

OPERATION CHECK 1. INSPECT INDICATOR/WARNING LIGHT (a) Check the following indicators and warning lights. Indicator/Warning Light Switch Condition Specified Conditi ...

Other materials about Toyota 4Runner:

Diagnosis System
DIAGNOSIS SYSTEM DESCRIPTION (a) Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the rear view monitor system seems to be malfunctioning, use the Techstream to check for malfunctions and to perform r ...

Cursor or Map Rotates when Vehicle Stopped
PROCEDURE 1. CHECK CONDITION (a) Check with the customer if the vehicle has been turned by a turntable. OK: Vehicle has not been turned by a turntable. HINT: If the vehicle is turned on a turntable with ...