Toyota 4Runner manuals

Toyota 4Runner: Key information

Keys

The following keys are provided with the vehicle.

Vehicles without a smart key system


1. Master keys Operating the wireless remote control function 2. Valet key
3. Key number plate

Vehicles with a smart key system


1. Electronic keys

• Operating the smart key system • Operating the wireless remote control function

2. Mechanical keys
3. Key number plate

Using the mechanical key (vehicles with a smart key system)


To take out the mechanical key, push the release button and take the key out.

After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key.

When required to leave the vehicle’s key with a parking attendant

Lock the glove box as circumstances demand.  Vehicles without a smart key system: Carry the master key for your own use and provide the attendant with the valet key.

Vehicles with a smart key system: Remove the mechanical key for your own use and provide the attendant with the electronic key only.

Key number plate

Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key (without a smart key system) or mechanical key (with a smart key system) is lost, a new key can be made by your Toyota dealer using the key number plate.

When riding in an aircraft

When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying the key in your bag etc., ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.

NOTICE

To prevent key damage

Observe the following:

• Do not drop the keys, subject them to strong shocks or bend them.

• Do not expose the keys to high temperatures for a long period of time.

• Do not get the keys wet or wash them in an ultrasonic washer etc.

• Do not attach metallic or magnetic materials to the keys or place the keys close to such materials.

• Do not disassemble the keys.

• Do not attach a sticker or anything else to the surface of the electronic key.

• Do not place the keys near objects that produce magnetic fields, such as TVs, audio systems and induction cookers, or medical electrical equipment, such as low frequency therapy equipment.

Carrying the electronic key on your person (vehicles with a smart key system)

Carry the electronic key 3.9 in. (10 cm) or more away from electric appliances that are turned on.

In case of a smart key system malfunction or other key-related problems (vehicles with a smart key system)

Take your vehicle with all the electronic keys provided with your vehicle to your Toyota dealer.

When a vehicle key is lost (vehicles with a smart key system)

If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.

Before driving
Adjusting and operating features such as door locks, mirrors, and steering column. ...

Opening, closing and locking the doors
...

Other materials about Toyota 4Runner:

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (a) Attach the 2 guides to install the instrument panel sub-assembly. ...

System Diagram
SYSTEM DIAGRAM Communication Table Sender Receiver Signal Line Main body ECU (Multiplex network body ECU) Combination meter assembly Front door courtesy light switch LH signa ...

© 2016-2024 | www.to4runner.net

0.0068