CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function, or the
function may be limited using the radio and display receiver assembly, even if the
portable audio player itself can play files (See page
).
PROCEDURE
1. |
CHECK THAT PORTABLE PLAYER IS "Bluetooth" AUDIO COMPATIBLE |
(a) Check if the portable player is "Bluetooth" audio compatible.
Result |
Proceed to |
---|---|
The portable player is "Bluetooth" audio compatible. |
A |
The portable player is not "Bluetooth" audio compatible. |
B |
B | ![]() |
USE A "Bluetooth" AUDIO COMPATIBLE PORTABLE PLAYER |
|
2. |
CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE |
(a) Referring to the Owner's manual, correctly register the portable player.
(b) Check that the portable player has been registered as a connected device.
The portable player cannot be registered under any of the following conditions:
OK:
The portable player has been registered as a connected device.
OK | ![]() |
END |
|
3. |
CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be registered normally on another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be registered.
NG | ![]() |
MALFUNCTION IN PORTABLE PLAYER |
|
4. |
REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Place the portable player close to the radio and display receiver assembly.
(c) Check that the portable player can be registered as a connected device.
OK:
The portable player can be registered.
OK | ![]() |
END |
NG | ![]() |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Turn the side auto step switch assembly to OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Main Body / Active ...
Installation
INSTALLATION
PROCEDURE
1. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Align the matchmarks on the No. 2 steering intermediate shaft and power steering
gear.
(b) Install the bolt.
Torque:
36 N·m {367 kgf·cm, 27 ft·lbf}
2. INSTALL NO. ...