Toyota 4Runner manuals

Toyota 4Runner: Precaution

PRECAUTION

1. IGNITION SWITCH EXPRESSION

HINT:

The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression

Ignition Switch (position)

Engine Switch (condition)

Ignition Switch off

Off

Off

Ignition Switch ON

ON

On (IG)

Ignition Switch ACC

ACC

On (ACC)

Engine Start

START

Start

Parts Location
PARTS LOCATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the meter/gauge system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP ...

Other materials about Toyota 4Runner:

Removal
REMOVAL PROCEDURE 1. REMOVE REAR NO. 2 SEAT ASSEMBLY (a) Remove the rear No. 2 seat assembly (See page ). 2. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board) 3. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board) 4. REMOVE NO. 2 LUG ...

Installation
INSTALLATION PROCEDURE 1. INSTALL VANE PUMP ASSEMBLY (a) Install the vane pump with the 2 bolts. Torque: 43 N·m {438 kgf·cm, 32 ft·lbf} (b) Install the wire harness bracket with the bolt. Torque: 43 N·m {438 kgf·cm, 32 ft·lbf} 2. CONNECT NO. 1 ...

© 2016-2020 | www.to4runner.net

0.0058