Toyota 4Runner manuals

Toyota 4Runner: Sound Quality is Bad Only when CD is Played (Volume is Too Low)

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Audio / Video / Audio And Visual System / Sound Quality is Bad Only when CD is Played (Volume is Too Low)

PROCEDURE

1.

REPLACE CD AND RECHECK

(a) Replace the CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.


OK

END


NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

No Sound can be Heard from Speakers
PROCEDURE 1. CHECK AUDIO SETTINGS (a) Set volume, fader and balance to the initial values and check that sound is normal. OK: Audio system returns to normal. HI ...

CD cannot be Ejected
PROCEDURE 1. CHECK OPERATION (a) Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the CD is ejected. OK: ...

Other materials about Toyota 4Runner:

Air Mix Damper Control Servo Motor Circuit (Driver Side) (B1446/46)
DESCRIPTION The damper servo sub-assembly (driver side air mix damper servo) sends pulse signals to inform the No. 1 air conditioning amplifier assembly of the damper position. The No. 1 air conditioning amplifier assembly activates the motor (normal or r ...

Power Source Control ECU Malfunction (B2782)
DESCRIPTION The steering lock ECU activates the steering lock motor with the power from the power management control ECU through the IGE circuit. This prevents the steering from being locked while the vehicle is moving. If NG (PAST) is displayed for Powe ...

© 2016-2020 | www.to4runner.net

0.0059