Toyota 4Runner: Components

Steering Gear

...

Removal

REMOVAL PROCEDURE 1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 2. REMOVE FRONT WHEELS 3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Click here 4. REMOVE REAR ENGINE UNDER COVER ASSEMBLY Clic ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT PROPELLER SHAFT ASSEMBLY (a) Using a dial indicator, check the propeller shaft runout. Maximum runout: 0.3 mm (0.0118 in.) If the shaft runout is more than the maximum, replace the propeller shaft. ...

Inspection
INSPECTION PROCEDURE 1. INSPECT TIE ROD END SUB-ASSEMBLY (a) Install the nut. (b) Flip the ball joint stud back and forth 5 times as shown in the illustration. (c) Using a torque wrench, turn the nut co ...