Toyota 4Runner: Components

Brake Master Cylinder

...

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE BRAKE FLUID INFORMATION LABEL 2. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY (a) Remove the brake master cylinder reservoir filler cap assembly from ...

Other materials about Toyota 4Runner:

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after d ...

Inspection
INSPECTION PROCEDURE 1. INSPECT PROPELLER SHAFT ASSEMBLY (a) Using a dial indicator, check the propeller shaft runout. Maximum runout: 0.4 mm (0.0157 in.) If the shaft runout is more than the maximum, replace the shaft. ...