Toyota 4Runner: Customize Parameters

Toyota 4Runner Service Manual / Vehicle Interior / Heating / Air Conditioning / Air Conditioning System(for Automatic Air Conditioning System) / Customize Parameters

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

HINT:

The following items can be customized.

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Air Conditioner

Display	Default	Contents	Setting	Relevant ECU
Set Temperature Shift	Normal	Function to set the temperature shift.	+2 C, +1 C, Normal, -1 C or -2 C	Air conditioning amplifier assembly
Compressor Mode	Automatic	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.	Automatic or Manual	Air conditioning amplifier assembly
Foot/DEF Auto Mode	ON	Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on.	ON or OFF	Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function	ON	Function to change the blower level automatically when the front defroster is on.	ON or OFF	Air conditioning amplifier assembly
Add Foot Air in FACE Mode	ON	When the FACE mode is selected, an additional amount of air is blown to the foot area.	ON or OFF	Air conditioning amplifier assembly

How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the air conditioning system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO W ...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are lis ...

Other materials about Toyota 4Runner:

Rear Stabilizer Bar(w/o Kdss)
Components COMPONENTS ILLUSTRATION Inspection INSPECTION PROCEDURE 1. INSPECT REAR STABILIZER LINK ASSEMBLY (a) As shown in the illustration, flip the ball joint stud back and forth 5 times. ...

Body
General Maintenance GENERAL MAINTENANCE PROCEDURE 1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY (a) Where necessary, tighten all the parts of the chassis. Front axle and suspension Drivetrain Rear axle and suspension Brake system ...