Select “List Audio Players” using a voice command or
. The list of registered portable
players will be read aloud.
When listing is complete, the system returns to “BT Audio Setup”.
Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:
• Selecting a portable player: “Select Audio Player” • Changing a registered name: “Change Name” • Deleting a portable player: “Delete Audio Player”
Changing the passkey
Select “Set Passkey” using a
voice command or
.
Press the talk switch, say a 4 to
8-digit number, and select “Confirm” using a voice command or
.
When the entire number to be
registered as a passkey has been input, press
again.
Deleting a registered portable player
Select “Delete Audio Player”
using a voice command or
.
Select the portable player to be
deleted by either of the following methods and select “Confirm” using a voice
command or
:
a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.
If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time.
A voice guidance instruction to delete a mobile phone is heard.
Select “Confirm” using a voice
command or
.
The number of portable players that can be registered
Up to 2 portable players can be registered in the system.
System setup items and operation procedures
Changing the registered name of a portable playerDtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Trouble Codes.
(e) Check for DTCs.
2. CLEAR DTC
(a) Connect the Tech ...
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY
(a) Using a center punch, mark the center of the tapered-head bolt.
(b) Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.
(c) Using a screw extractor, remo ...