Toyota 4Runner manuals

Toyota 4Runner: Portable Player cannot be Connected Manually/Automatically

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Navigation / Multi Info Display / Navigation System / Portable Player cannot be Connected Manually/Automatically

CAUTION / NOTICE / HINT

HINT:

Some versions of "Bluetooth" compatible audio players may not function, or the function may be limited using the navigation receiver assembly, even if the portable audio player itself can play files (See page ).


PROCEDURE

1.

CHECK CONNECTED DEVICE SETTINGS

(a) Check if the portable player is registered as a connected device.

NOTICE:

If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

HINT:

Only 5 portable players can be registered.

Result

Proceed to

The portable player is registered as a connected device.

A

The portable player is not registered as a connected device.

B


B

REGISTER PORTABLE PLAYER AS CONNECTED DEVICE

A

2.

CHECK SYMPTOMS

(a) Check the connection condition between the portable player and navigation receiver assembly.

The portable player cannot be connected under any of the following conditions:

  • The portable player is connected to another device.
  • The navigation receiver assembly has cleared the portable player registration.
  • The portable player is off.

Result

Proceed to

The portable player cannot be connected automatically.

A

The portable player cannot be connected manually.

B


B

GO TO STEP 4

A

3.

CHECK AUTOMATIC CONNECTION SETTINGS

(a) Check automatic connection settings of the "Bluetooth" audio.

(1) Check that the "Bluetooth" connection is on.

OK:

"Bluetooth" connection is on.


NG

CHANGE "Bluetooth" POWER TO "On"

OK

4.

CHECK PORTABLE PLAYER STATUS

(a) Check the status of the portable player.

(1) Check that the portable player is not in standby mode.

(2) Check that the portable player is not connected to another device (headphones etc.).

OK:

The portable player is not in standby mode and not connected to another device (headphones etc.).


NG

TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)

OK

5.

CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

(a) Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

OK:

The portable player can be connected manually/automatically.


NG

PORTABLE PLAYER IS NOT COMPATIBLE

OK

6.

REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

(a) Remove additional devices which use radio waves.

(b) Check if the portable player can be connected manually/automatically.

OK:

The portable player can be connected manually/automatically.


OK

END


NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device
PROCEDURE 1. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL (a) Check if track information is displayed normally on another "Bl ...

Registered Device cannot be Deleted
PROCEDURE 1. DELETE OPERATION (a) Check if a registered portable player can be deleted normally. OK: Registered portable player can be deleted normally. OK ...

Other materials about Toyota 4Runner:

Installing child restraints using a seat belt (child restraint lock function belt)
Rear facing -- Infant seat/convertible seat Place the child restraint system on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not tw ...

Inspection
INSPECTION PROCEDURE 1. CHECK PAD LINING THICKNESS (a) Using a ruler, measure the pad lining thickness. Standard thickness: 10.0 mm (0.394 in.) Minimum thickness: 1.0 mm (0.0394 in.) If the pad lining thickness is less than the m ...

© 2016-2024 | www.to4runner.net

0.0273