Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Interior / Heating / Air Conditioning / Front Evaporator Temperature Sensor / Removal

REMOVAL

PROCEDURE

1. REMOVE AIR CONDITIONING UNIT

(a) Remove the air conditioning unit (See page ).

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE BLOWER ASSEMBLY (a) Remove the screw. (b) Detach the 2 claws and remove the blower unit assembly. 2. REMO ...

Inspection

INSPECTION PROCEDURE 1. INSPECT NO. 1 COOLER THERMISTOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Conne ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT PROPELLER SHAFT ASSEMBLY (a) Using a dial indicator, check the propeller shaft runout. Maximum runout: 0.4 mm (0.0157 in.) If the shaft runout is more than the maximum, replace the shaft. ...

System Description
SYSTEM DESCRIPTION 1. GENERAL (a) In conjunction with the impact absorbing structure for a front collision, the SRS (Supplemental Restraint System) steering pad, instrument panel passenger airbag, lower No. 1 instrument panel airbag, lower No. 2 instrume ...