To enter the menu of each setting, follow the steps below:
Security setting items and operation procedure
• Setting or changing the PIN (Personal Identification Number) 1. “Setup
(Setup)” → 2. “Security” → 3. “Set PIN”
• Locking the phone book 1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Lock
(Phone book lock)”
• Unlocking the phone book 1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook
Unlock (Phone book unlock)”
System setup items and operation procedure
• Setting voice guidance volume 1. “Setup (Setup)” → 2. “System Setup” → 3.
“Guidance Volume”
• Initialization 1. “Setup (Setup)” → 2. “System Setup” → 3. “Reset Settings”
can only be used for system setup
operation.
Setting or changing the PIN
Setting a PIN
Select “Set PIN” using a voice
command or .
Enter a PIN using a voice command
or .
When using , input the code 1
digit at a time.
Changing the PIN
Select “Set PIN” using a voice
command or .
Enter the registered PIN using a
voice command or .
Enter a new PIN using a voice
command or .
When using , input the code 1
digit at a time.
Locking or unlocking the phone book
Select “Phonebook Lock (Phone
book lock)” or “Phonebook Unlock (Phone book unlock)” using a voice command or
.
Input the PIN by either of the
following methods and select “Confirm” using a voice command or
:
a. Press the talk switch and say the registered PIN.
b. Input a new PIN using .
Setting voice guidance volume
Select “Guidance Volume” using
.
Change the voice guidance volume.
To decrease the volume: Turn
counterclockwise.
To increase the volume: Turn
clockwise.
Initialization
Select “Reset Settings” and then
“Confirm” using .
Select “Confirm” using
.
Initialization
• The following data in the system can be initialized:
• Phone book
• Outgoing and incoming call history
• Speed dials
• Registered cellular phone data
• Security code
• Once the initialization has been completed, the data cannot be restored to its original state.
When the phone book is locked
The following functions cannot be used:
• Dialing by inputting a name
• Speed dialing
• Dialing a number stored in the call history memory
• Using the phone book
Inspection
INSPECTION
PROCEDURE
1. INSPECT WIRELESS DOOR LOCK BUZZER
(a) Measure the resistance according to the value(s) in the table below.
HINT:
The buzzer activation circuit is built into the ECU, not into the buzzer
itself. When battery volta ...
Diagnosis System
DIAGNOSIS SYSTEM
1. CHECK WARNING LIGHT
NOTICE:
When there is a problem with the tire pressure warning system, the tire
pressure warning light blinks at 0.5 second intervals and comes on after
1 minute.
When the malfunction has been corr ...