Toyota 4Runner: Shifting between H4F and H4L
Push the “UNLOCK” button and turn the four-wheel drive control switch to H4L or H4F.
This can be done at any speed.
The center differential lock indicator will turn on (H4L) or go off (H4F).
Four-wheel drive system (full-time 4WD models)
Use the four-wheel drive control switch to select the following transfer
modes:
1. H4F (high speed position)
Use this for normal driving on dry hard-surfaced roads. This position gives
greate ...
Shifting between H4L and L4L
Shifting from H4L to L4L
Stop the vehicle completely and
continue to depress the brake pedal.
Shift the shift lever to N.
Push the “UNLOCK” button and then push and turn the fourwheel dri ...
Other materials about Toyota 4Runner:
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK
BODY ECU)
(a) Remove the main body ECU (multiplex network body ECU) (See page
).
(b) Measure the voltage and resistance according to the value(s) in the ...
Dtc Check / Clear
DTC CHECK / CLEAR
1. DTC CHECK / CLEAR (when Using Techstream)
(a) Check for DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Cod ...
0.0257