• A recommended tongue weight varies in accordance with the types of trailers or towing as described below.
• To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions.
• Tongue Weight The gross trailer weight should be distributed so that the tongue weight is 9% to 11%. (Tongue weight /Gross trailer weight x 100 = 9% to 11%)

1. Gross trailer weight 2. Tongue weight
If using a weight distributing hitch when towing, return the front axle to the same weight as before the trailer connection.
If front axle weight cannot be measured directly, measure the front fender height above the front axle before connection.
Adjust weight distributing hitch torque until front fender is returned to the same height as before connection.
The gross trailer weight, gross axle weight and tongue weight can be measured with platform scales found at a highway weighing station, building supply company, trucking company, junk yard, etc.
GCWR, TWR and Unbraked TWR
HitchInspection
INSPECTION
PROCEDURE
1. CHECK PAD LINING THICKNESS
(a) Using a ruler, measure the pad lining thickness.
Standard thickness:
10.0 mm (0.394 in.)
Minimum thickness:
1.0 mm (0.0394 in.)
If the pad lining thickness is less than the m ...
Rear Window Defogger System does not Operate
DESCRIPTION
When the back door power window is fully closed and the rear window defogger
switch is turned on, a rear window defogger activation request signal is sent via
the LIN communication line to the air conditioning amplifier.
WIRING DIAGRAM
CAU ...