Toyota 4Runner manuals

Toyota 4Runner: Windshield wiper de-icer

This feature is used to prevent ice from building up on the windshield and wiper blades.


Turns the windshield wiper deicer on/off

The windshield wiper de-icer will automatically turn off after approximately 15 minutes.

The windshield wiper de-icer can be operated when Vehicles without a smart key system

The engine switch is in the “ON” position.

Vehicles with a smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

CAUTION

When the windshield wiper de-icer is on

Do not touch the lower part of the windshield or the side of the front pillars, as the surfaces can become very hot and burn you.

Rear window and outside rear view mirror defoggers
Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors. Before operating the defoggers, make sure the back window is completely clo ...

Using the audio system
...

Other materials about Toyota 4Runner:

Terminals Of Ecu
TERMINALS OF ECU 1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND DRIVER SIDE JUNCTION BLOCK ASSEMBLY (a) Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly (See page ). (b) Measure the resistanc ...

Installation
INSTALLATION PROCEDURE 1. INSTALL STEERING WHEEL ASSEMBLY (a) Align the matchmarks on the steering wheel assembly and steering main shaft assembly. (b) Install the steering wheel assembly set nut. Torque: 50 N·m {510 kgf·cm, 37 ft·lbf} 2. INSTALL ...

© 2016-2021 | www.to4runner.net

0.0074