To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine.
Follow the procedure below to restart the engine after the system is activated.
Vehicles without a smart key system
Turn the engine switch to the
“ACC” or “LOCK” position.
Restart
the engine.
Vehicles with a smart key system
Turn the “ENGINE START STOP”
switch off.
Restart the
engine.
NOTICE
Before starting the engine
Inspect the ground under the vehicle.
If you find that fuel has leaked onto the ground, the fuel system has been damaged and is in need of repair. Do not restart the engine.
If you think something is wrongPrecaution
PRECAUTION
CAUTION:
This vehicle is equipped with a Supplemental Restraint System (SRS),
which consists of a steering pad, instrument panel passenger airbag, curtain
shield airbag, front seat side airbag, lower No. 1 instrument panel airbag, ...
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL FRONT PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same procedure for all propeller shaft universal joint spider bearing.
(a) Apply MP grease to a new spider and spider bearing.
NOTICE:
Be c ...