Toyota 4Runner manuals

Toyota 4Runner: Installation

INSTALLATION

PROCEDURE

1. INSTALL POWER OUTLET SOCKET COVER

(a) Attach the 2 claws to install the socket cover.

2. INSTALL POWER OUTLET SOCKET ASSEMBLY

(a) Attach the claw to install the power outlet socket assembly.

3. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Climate Control Seat System)


4. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Climate Control Seat System)


5. INSTALL NO. 2 CONSOLE BOX RETAINER


6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)


9. INSTALL HEATER CONTROL ASSEMBLY


10. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


11. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH 2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH 3. REMOVE HEATER CONTROL ASSEMBLY 4. REMOVE SHIFT LEVER ...

Rear Power Outlet Socket
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE POWER OUTLET SOCKET BEZEL (w/o Smart Key System) (a) Put protective tape around the power outlet socket b ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL FRONT AXLE HUB OIL SEAL LH (a) Using SST and a press, press in a new oil seal. SST: 09608-36010 SST: 09950-70010 09951-07100 NOTICE: Do not damage the oil seal. ...

Installation
INSTALLATION PROCEDURE 1. INSTALL SLIDING ROOF HOUSING SUB-ASSEMBLY (a) Temporarily install the housing with the 8 bolts (vehicle body side) and 8 nuts. (b) Tighten the 8 nuts in alphabetical order. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf} (c) Tight ...

© 2016-2020 | www.to4runner.net

0.0061