Toyota 4Runner: Components

Navigation Antenna

...

Removal

REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS sys ...

Other materials about Toyota 4Runner:

LVDS Signal Malfunction (from Extension Module) (B1532)
DESCRIPTION DTC No. DTC Detection Condition Trouble Area B1532 When one of the conditions below is met: Stereo component tuner assembly is/was not connected while the ignition sw ...

Dtc Check / Clear
DTC CHECK / CLEAR 1. DTC CHECK / CLEAR (when Using Techstream) (a) Check for DTCs. (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Cod ...