Toyota 4Runner: Customize Parameters
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below.
Slide Roof|
Display |
Default |
Contents |
Setting |
|---|---|---|---|
|
Door Key Related Open*1 |
ON |
The function to manually open the sliding roof linked with the power windows by holding the driver side door key for 1.5 seconds or more to the unlock position when the ignition switch is off. |
ON or OFF |
|
Door Key Related Close*1 |
ON |
The function to manually close the sliding roof linked with the power windows by holding the driver side door key for 1.5 seconds or more to the lock position when the ignition switch is off. |
ON or OFF |
|
Wireless Key Related Open*2 |
ON |
The function to manually open the sliding roof linked with the power windows by pressing the transmitter UNLOCK switch for 1.5 seconds or more when the ignition switch is off. |
ON or OFF |
|
Door Key Related Operation |
Slide |
The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by holding the driver side door key for 1.5 seconds or more to the unlock position when the ignition switch is off. |
Slide or Tilt |
|
Wireless Key Related Operation |
Slide |
The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by pressing on the transmitter UNLOCK switch for 1.5 seconds or more when the ignition switch is off. |
Slide or Tilt |
HINT:
- *1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.
- *2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.
Operation Check
OPERATION CHECK
NOTICE:
Perform initialization before performing the operation check.
1. CHECK AUTO OPERATION
HINT:
When pressing the switch for 0.3 seconds or less, the roof glass moves but auto ...
Initialization
INITIALIZATION
1. INITIALIZE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY
NOTICE:
Before starting this operation, make sure that the guide rails are not
deformed and there is no foreign object ...
Other materials about Toyota 4Runner:
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
A bolt without a torque specification is shown in the standard bolt chart (See
page ).
PROCEDURE
1. INSTALL REAR NO. 2 SPOILER CLIP
HINT:
Use the same procedure to install the rear No. 2 spoiler clip on the ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
(a) Insert the stereo component amplifier to attach the 2 claws.
(b) Install the amplifier with the 3 bolts.
Torque:
2.5 N·m {25 kgf·cm, 22 in·lbf}
(c) Connect the 4 connectors.
...
0.0152