Toyota 4Runner: Diagnostic Trouble Code Chart

Toyota 4Runner Service Manual / Vehicle Interior / Door Lock / Wireless Door Lock Control System(w/ Smart Key System) / Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

HINT:

If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.

Wireless Door Lock Control System

DTC Code	Detection Item	Trouble Area	See page
B1242	Wireless Door Lock Tuner Circuit Malfunction	- Harness or connector - Door control receiver - Certification ECU

DTC Code

Detection Item

Trouble Area

See page

B1242

Wireless Door Lock Tuner Circuit Malfunction

- Harness or connector

- Door control receiver

- Certification ECU

Data List / Active Test

DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing ...

Wireless Door Lock Tuner Circuit Malfunction (B1242)

DESCRIPTION The door lock receiver is used to receive electrical waves relating to the entry functions of the smart key system (for Entry Function). The certification ECU decodes the requested sm ...

Other materials about Toyota 4Runner:

System Diagram
SYSTEM DIAGRAM Communication Table Sender Receiver Signal Line Combination meter assembly Main body ECU (Multiplex network body ECU) Vehicle speed signal CAN ...

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after d ...