Toyota 4Runner manuals

Toyota 4Runner: Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

HINT:

If a trouble code is output during the DTC check, inspect the trouble areas for that code. For details of the code, refer to the "See page" below.

DTC Code

Detection Item

See page

B1500

Fuel Sender Open Detected


U0100

Lost Communication with ECM / PCM "A"


U0129

Lost Communication with Skid Control ECU


U0131

Lost Communication with Power Steering Control Module


U0151

Lost Communication with Airbag ECU


Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. T ...

Fuel Sender Open Detected (B1500)
DESCRIPTION This DTC is stored when the combination meter detects a fuel sender gauge malfunction. DTC Code DTC Detection Condition Trouble Area B15 ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL TRANSFER POSITION SWITCH (for VF2BM) 2. INSTALL TRANSFER POSITION SWITCH (for VF4BM) 3. INSTALL NO. 2 BOX BOTTOM MAT (for 2WD) (a) Attach the 4 claws to install the No. 2 box bottom mat. 4. INSTALL FRONT UPPER CONSOL ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE FRONT WHEEL 2. DISCONNECT FRONT DISC BRAKE CYLINDER ASSEMBLY LH 3. REMOVE FRONT DISC 4. REMOVE FRONT AXLE HUB GREASE CAP 5. INSPECT FRONT AXLE HUB BEARING LOOSENESS (a) Using a dial indicator ...

© 2016-2025 | www.to4runner.net

0.0089