Toyota 4Runner: Diagnostic Trouble Code Chart

Toyota 4Runner Service Manual / Vehicle Interior / Seat / Front Power Seat Control System(w/ Memory) / Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

Front Power Seat Control System

DTC Code	Detection Item	See page
B2650	Slide Sensor Malfunction
B2651	Reclining Sensor Malfunction
B2652	Front Vertical Sensor Malfunction
B2653	Lifter Sensor Malfunction
B2658	Short in Sensor with Motor Power Supply Circuit

Dtc Check / Clear

DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / (desired sy ...

Lifter Sensor Malfunction (B2653)

DESCRIPTION When the front power seat switch LH does not receive a sensor signal despite upward or downward movement of the seat by power seat motor operation, this DTC is stored. DTC ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING HINT: Use the same procedure for all rear propeller shaft universal joint spider bearing. (a) Apply MP grease to the universal joint spider and new bearings. ...

Multi-terrain Select Indicator Light does not Come ON
DESCRIPTION When the ON/OFF switch of the multi-terrain select switch is turned on, multi-terrain select control is enabled and the multi-terrain select indicator light illuminates. After selecting a road surface type using the mode selector switch of the ...