Toyota 4Runner: Seat
- Climate Control Seat Switch
- Climate Control Seat System
- Front Power Seat Control System(w/ Memory)
- Front Power Seat Control System(w/o Memory)
- Front Seat Assembly(for Manual Seat)
- Front Seat Assembly(for Power Seat)
- Front Seat Cushion Heater
- Front Seatback Heater
- Lumbar Switch
- Power Seat Switch
- Rear No. 1 Seat Assembly(for 60/40 Split Double-folding Seat Type Lh Side)
- Rear No. 1 Seat Assembly(for 60/40 Split Double-folding Seat Type Rh Side)
- Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Lh Side)
- Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Rh Side)
- Rear No. 2 Seat Assembly
- Seat Heater Control
- Seat Heater Switch
- Seat Heater System
- Seat Memory Switch
Installation
INSTALLATION
PROCEDURE
1. INSTALL VOLTAGE INVERTER ASSEMBLY
(a) Install the voltage inverter with the 3 bolts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
(b) Connect the 2 connectors.
2. INSTAL ...
Other materials about Toyota 4Runner:
Data List / Active Test
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very usefu ...
Removal
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEAT ASSEMBLY RH
(a) Remove the rear No. 1 seat assembly RH (See page
).
2. REMOVE NO. 1 SEATBACK BOARD SUB-ASSEM ...
© 2016-2026 | www.to4runner.net
0.0286
0.0286