Toyota 4Runner: Id Code Box

Toyota 4Runner Service Manual / Vehicle Interior / Theft Deterrent / Keyless Entry / Id Code Box

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

PROCEDURE

1. INSTALL ID CODE BOX

(a) Attach the 2 claws and move the ID code box in the direction of the arrow.

(b) Move the ID code box in the direction of the arrow to attach the claw and install the ID code box.

2. INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY

(a) Install the air conditioning unit (See page ).

3. REGISTER ECU CODE

(a) Register the ECU code (See page ).

Removal

REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY

(a) Remove the air conditioning unit (See page ).

2. REMOVE ID CODE BOX

(a) Move the ID code box in the direction of the arrow in the illustration to detach the claw.

(b) Move the ID code box in the direction of the arrow to detach the 2 claws and remove the ID code box.

ECU Power Source Circuit

DESCRIPTION This circuit provides power to operate the transponder key ECU assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before ...

Security Horn Assembly

Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE AIR CLEANER CAP AND HOSE 2. REMOVE AIR CLEANER CASE SUB-ASSEMBLY 3. REMOVE SECURITY HORN ASSEMBLY ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL COOLER DRYER (a) Using pliers, install the cooler dryer. (b) Apply a sufficient amount of compressor oil to the contact surfaces of a new O-ring and the cap. Compressor oil: ND-OIL 8 or equivalent ...

Steering Angle Sensor Initialization Incomplete (C1439,C1445)
DESCRIPTION The skid control ECU acquires steering angle sensor zero point every time the ignition switch is turned to ON and the vehicle is driven at 40 km/h (25 mph) or more for approximately 10 seconds. The ECU also stores the previous zero point. The ...