Toyota 4Runner: Diagnostic Trouble Code Chart

Dtc Check / Clear

DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Navigation Sys ...

Back Camera Disconnected (C1622)

DESCRIPTION This DTC is stored if the radio and display receiver assembly judges that the signals or signal lines between the radio and display receiver assembly, and the rear television camera a ...

Other materials about Toyota 4Runner:

Output Speed Sensor Circuit No Signal (P0722)
DESCRIPTION The speed sensor SP2 detects the rotation speed of the transmission output shaft and sends signals to the ECM. The ECM determines the vehicle speed based on these signals. An AC voltage is generated in the speed sensor SP2 coil as the parking ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL MULTIPLEX NETWORK BODY ECU NOTICE: Make sure that no foreign objects contact the connecting ...