If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible.
Visible symptoms
• Fluid leaks under the vehicle
(Water dripping from the air conditioning after use is normal.)
• Flat-looking tires or uneven tire wear
• Engine coolant temperature gauge needle continually points higher than normal
• Voltmeter (if equipped) continually points higher or lower than normal
Audible symptoms
• Changes in exhaust sound
• Excessive tire squeal when cornering
• Strange noises related to the suspension system
• Pinging or other noises related to the engine
Operational symptoms
• Engine missing, stumbling or running roughly
• Appreciable loss of power
• Vehicle pulls heavily to one side when braking
• Vehicle pulls heavily to one side when driving on a level road
• Loss of brake effectiveness, spongy feeling, pedal almost touches the floor
Installation
INSTALLATION
PROCEDURE
1. INSTALL STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY
(a) Install the stabilizer control with accumulator housing with the 3 bolts.
Torque:
29 N·m {296 kgf·cm, 21 ft·lbf}
(b) Connect the connector, and then attach the ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
A bolt without a torque specification is shown in the standard bolt chart (See
page ).
PROCEDURE
1. INSTALL NO. 1 SEAT 3 POINT ...