Loading a CD (type A and B)
Insert a CD.
Loading a CD (type C)
Press
.
When the indicator on the slot turns
from amber to green, insert a CD.
Loading multiple CDs (type C only)
Press and hold
until you hear a beep.
When the indicator on the slot turns
from amber to green, insert a CD.
The indicator on the slot turns to amber when the CD is inserted.
When
the indicator on the slot turns from amber to green again, insert the next CD.
Repeat the procedure for the remaining CDs.
To cancel, press
. If you do not insert a disc within
15 seconds, loading will be canceled automatically.
Test Mode Procedure
TEST MODE PROCEDURE
NOTICE:
After replacing the master cylinder solenoid and/or yaw rate and acceleration
sensor, perform calibration.
VSC is prohibited during test mode.
HINT:
By switching the skid control ECU from normal mod ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are listed in order of probability in the "Suspected Area" ...