Making a phone call
• Dialing by inputting a number
“Dial by Number”
• Dialing by inputting a name
“Dial by Name (Dial by name)”
• Speed dialing
• Dialing a number stored in the outgoing history memory
“Redial”
• Dialing a number stored in the incoming history memory
“CallBack (Callback)”
Receiving a phone call
• Answering a phone call
• Refusing a phone call
Transferring a phone call
Using the call history memory
• Dialing
• Storing data in the phone book
• Deleting
Dialing by inputting a number
Press the talk switch and say
“Dial by number”.
Press the talk switch and say the
phone number.
Dial by one of the following
methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using .
Dialing by inputting a name
Press the talk switch and say
“Dial by name”.
Select a registered name to be
input by either of the following methods:
a. Press the talk switch and say a registered name.
b. Press the talk switch and say “List names”. Press the talk switch while the desired name is being read aloud.
Dial by one of the following
methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using .
Speed dialing
Press the off-hook switch.
Press the preset button to which
the desired number is registered.
Press the off-hook switch.
When receiving a phone call
Answering a phone call
Press the off-hook switch.
Refusing a phone call
Press the on-hook switch.
Transferring a phone call
A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods:
a. Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the operation of the phone.
b. Press the off-hook switch*1.
c. Press the talk switch and say “Call transfer”*2.
*1: This operation can be performed only when transferring a call from the cellular phone to the system during a call.
*2: While the vehicle is in motion, a call cannot be transferred from the system to the cellular phone. Also, this operation is invalid while dialing or receiving a call.
Using the call history memory
Follow the procedure below to use a number stored in the call history memory:
Press the talk switch and say
“Redial” (when using a number stored in the outgoing call history memory) or
“Callback” (when using a number stored in the incoming call history memory).
Select the number by either of
the following methods:
a. Say “Previous” or “Go back” until the desired number is displayed.
b. Select the desired number using
.
The following operations can be performed:
Dialing: Press the off-hook switch or select “Dial” using a voice command or
.
Storing the number in the phone book: Select “Store” using a voice command or
.
Deleting: Select “Delete” using a voice command or
.
Call history
Up to 5 numbers can be stored in each of the outgoing and incoming call history memories.
When talking on the phone
• Do not talk at the same time as the other party.
• Keep the volume of the incoming voice down. Otherwise, voice echo will increase.
Wireless remote control/electronic key battery
Replace the battery with a new one if it is depleted.
You will need the following items:
• Flathead screwdriver
• Lithium battery CR2016 (vehicles without a smart key system), or CR1632
(vehicles with a smart key system)
Replacing the battery (vehic ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use these procedures to troubleshoot the smart key system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...