Toyota 4Runner: Poor Sound Quality in All Modes (Low Volume)

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Audio / Video / Audio And Visual System / Poor Sound Quality in All Modes (Low Volume)

PROCEDURE

1.	CHECK AUDIO SETTINGS

(a) Set "Treble", "Mid" and "Bass" to the initial values and check that sound is normal.

OK:

Malfunction disappears.

HINT:

Sound quality adjustment measures vary according to the type of amplifier.

END

2.	COMPARE WITH ANOTHER VEHICLE OF SAME MODEL

(a) Compare with another vehicle of the same model which does not have trouble to see if there is any difference in the sound quality.

OK:

No difference is found.

END

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Screen Flicker or Color Distortion

PROCEDURE 1. CHECK DISPLAY SETTING (a) Reset display settings (contrast, brightness) and check that the screen appears normal. OK: The display returns to normal. ...

Voice Guidance does not Function

PROCEDURE 1. CHECK VOICE GUIDANCE SETTING (a) Display the "Voice Settings" screen. (b) Check if the "Voice Recognition Prompts" is not "Off& ...

Other materials about Toyota 4Runner:

Rear Lateral Control Rod
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE REAR LATERAL CONTROL ROD ASSEMBLY (a) Remove the bolt. (b) Remove the bolt, nut and lateral control rod assembl ...

Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter
DESCRIPTION The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit. The sound signal that has been sent is amplified by the radio and display receiver assembly and ...