Toyota 4Runner manuals

Toyota 4Runner: Removing a child restraint installed with a seat belt

Toyota 4Runner Owners Manual / Before driving / Safety information / Installing child restraints / Removing a child restraint installed with a seat belt


Push the buckle release button and fully retract the seat belt.

Installing child restraints using a seat belt (child restraint lock function belt)
Rear facing -- Infant seat/convertible seat Place the child restraint system on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint system and insert th ...

Child restraint systems with a top tether strap
Secure the child restraint system using a seat belt or the lower anchors, and remove the head restraint. Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL COOLER DRYER (a) Using pliers, install the cooler dryer. (b) Apply a sufficient amount of compressor oil to the contact surfaces of a new O-ring and the cap. Compressor oil: ND-OIL 8 or equivalent ...

Removal
REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system. NOTICE: When disconnecting the cable, some systems ne ...

© 2016-2025 | www.to4runner.net

0.0069