Adjusting and operating features such as door locks, mirrors, and steering column.
Symbols used in illustrations
Key informationInspection
INSPECTION
PROCEDURE
1. INSPECT AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Remove the magnets and use them to collect steel particles.
(b) Carefully look at the foreign matter and particles in the pan and on the
magnets to anticipate the type of wea ...
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Check for DTCs.
HINT:
Refer to ...