Toyota 4Runner manuals

Toyota 4Runner: System Description

SYSTEM DESCRIPTION

1. DESCRIPTION

(a) A maximum of 3 kinds of transmitter code based systems (example: garage doors, gates and entry gates) can be registered with the vehicle garage door opener. After registration, the vehicle garage door opener can mimic the signal of the transmitter systems and the original transmitters of each transmitter system are not needed.

System Diagram
SYSTEM DIAGRAM ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT GARAGE DOOR OPENER (a) Press each switch and check that the red LED turns on. If one or more of the switches does not turn on the LED, conf ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FLOOR SIDE SILL STAY (a) Install the floor side sill stay with the 6 bolts. ...

Rear Power Window LH Auto Up / Down Function does not Operate with Rear Power Window Switch LH
DESCRIPTION If the auto up/down function does not operate, the cause may be one or more of the following: The ECU in the power window regulator motor determines that the power window regulator motor has not been initialized. The rear power w ...

© 2016-2024 | www.to4runner.net

0.0082