Toyota 4Runner manuals

Toyota 4Runner: Traffic Information is not Displayed

CAUTION / NOTICE / HINT

NOTICE:

  • Traffic information requires payment. An "XM Nav Traffic" contract must be made between the satellite radio company and the user. If the contract expires, traffic information will not be available.
  • Traffic information does not apply to all roads, only main roads. For the latest information on coverage areas, contact the satellite radio company.
  • After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

PROCEDURE

1.

CHECK DISPLAY

(a) Check which communication is not being used for displaying traffic information.

HINT:

Display of traffic information received via HD traffic is given priority while in an HD radio service area.

Result

Proceed to

Traffic information using HD radio communication is not displayed.

A

Traffic information using Entune function communication is not displayed.

B


B

GO TO STEP 3

A

2.

CHECK SYMPTOMS

(a) Check for symptoms (poor sound quality, sounds cannot be heard, etc.) during conventional FM radio broadcasting.

Result

Proceed to

Symptoms occur.

A

Symptoms do not occur.

B

OK:

Actual traffic conditions match display.


A

GO TO "RADIO BROADCAST CANNOT BE RECEIVED OR POOR RECEPTION" IN PROBLEM SYMPTOMS TABLE


B

GO TO STEP 5

3.

CHECK SYMPTOMS

(a) Check for symptoms (cellular phone cannot be registered, applications cannot be started, etc.) with the Entune function.

Result

Proceed to

Symptoms occur.

A

Symptoms do not occur.

B


A

GO TO "ENTUNE FUNCTION" IN PROBLEM SYMPTOMS TABLE

B

4.

CHECK SETTINGS

(a) Check if the navigation system is set to receive traffic information using Entune function communication as well as HD radio communication.

OK:

The navigation system is set to use Entune function communication.


NG

END

OK

5.

CHECK SETTINGS OF TRAFFIC INFORMATION

(a) Check if the display setting of traffic information on the navigation screen is on.

OK:

The display setting of traffic information is on.


NG

END

OK

6.

CHECK COVERAGE AREA

(a) Check that the current position of the vehicle is within the HD traffic or Entune function coverage area.

OK:

Vehicle is within coverage area.


NG

MOVE TO WITHIN COVERAGE AREA (FOR LATEST COVERAGE AREA, CONFIRM WITH RADIO STATION)

OK

7.

CHECK SCALE OF MAP DISPLAY

(a) Check if the traffic information that is currently not displayed can be displayed at the scale shown in the table below.

Traffic Information to be Displayed

Display Scale

Traffic information list

1:1280000 or below

Traffic information icon (Closed Road, Accidents, Danger, Road Conditions, Road Works, Weather)

1:640000 or below

Traffic information icon (Stationary Traffic Jam, Delays, Parking, Other)

1:80000 or below

OK:

Traffic information can be displayed.


OK

END


NG

REPLACE NAVIGATION RECEIVER ASSEMBLY

Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it w ...

Noise Occurs
PROCEDURE 1. NOISE CONDITION (a) Check from which direction the noise comes (front left or right, or rear left or right). OK: The location of the noise source ca ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING HINT: Use the same procedure for all rear propeller shaft universal joint spider bearing. (a) Apply MP grease to the universal joint spider and new bearings. ...

General maintenance
Listed below are the general maintenance items that should be performed at the intervals specified in the “Owner's Warranty Information Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem ...

© 2016-2024 | www.to4runner.net

0.0067