Toyota 4Runner: Using the automatic air conditioning system
Press
.
The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting.
Turn
clockwise to increases the
temperature and turn 
counterclockwise to decreases the temperature on the driver’s side.
When 
is pressed (the indicator
on
is on) or the passenger’s side
temperature control dial is turned, the temperature for the driver and passenger
seats can be adjusted separately.
Automatic air conditioning system
Air outlets and fan speed are automatically adjusted according to the
temperature setting.
...
Adjusting the settings manually
Basic setting
To turn on the air conditioning
system and adjust the fan speed, press “>” on
to increase the fan speed and “<”
to decrease the fan speed.
Press to turn the fan o ...
Other materials about Toyota 4Runner:
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL REAR AXLE SHAFT OIL SEAL LH
(a) Using SST and a hammer, install a ...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ign ...
0.0155