On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Apply the parking brake and turn the ignition switch on (IG).
(b) Depress the brake pedal and check that the engine starts when the shift lever
is in N or P, but does no ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
NOTICE:
Turn the ignition switch off before removing parts.
HINT:
If no abnormality is found when inspecting parts, inspect the stabilizer
control ECU and ground points for poor contact.
If a trouble code is ou ...