Toyota 4Runner: Steering Column

Installation

INSTALLATION PROCEDURE 1. INSTALL VANE PUMP ASSEMBLY (a) Install the vane pump with the 2 bolts. Torque: 43 N·m {438 kgf·cm, 32 ft·lbf} (b) Install the wire harness bracket with the bolt. T ...

Steering Column Assembly

...

Other materials about Toyota 4Runner:

TC and CG Terminal Circuit
DESCRIPTION DTC output mode is set by connecting terminals 13 (TC) and 4 (CG) of the DLC3. The DTCs are output by the blinking of the tire pressure warning light. WIRING DIAGRAM HINT: When each warning light blinks continuously, a ground short in the w ...

Installation
INSTALLATION PROCEDURE 1. INSTALL CENTER CONTROL ABSORBER BRACKET LH (a) Install the center control absorber bracket with the 2 bolts. Torque: 29 N·m {296 kgf·cm, 21 ft·lbf} 2. INSTALL CENTER CONTROL ABSORBER BRACKET RH HINT: Use the same procedure ...