Toyota 4Runner: Components

Front Brake

...

Removal

REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT WHEEL 2. DRAIN BR ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL REAR STABILIZER LINK ASSEMBLY (a) Install the rear stabilizer link assembly with the bolt and nut. Torque: 100 N·m {1020 kgf·cm, 74 ft·lbf} HINT: Turn the nut while holding the bolt. 2. INSTALL REAR STABILIZER CONT ...

Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT DRIVE SHAFT ASSEMBLY NOTICE: Keep the drive shaft level while handling it. (a) Check if there is excessive play in the outboard joint. (b) Check if the inboard joint shaft slides smoothly in the thrust direction. ...