Toyota 4Runner manuals

Toyota 4Runner: Components

COMPONENTS

ILLUSTRATION


Oil Pump
...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE AUTOMATIC TRANSMISSION CASE O-RING (a) Remove the O-ring from the oil pump assembly. 2. FIX OIL PUMP ASSEMBLY ...

Other materials about Toyota 4Runner:

Transmitter ID1 Error (C2141/41-C2145/45)
DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the air pressure of the tires. The measured values are transmitted to the tire pressure warning antenna and receiver on the body as ...

Installation
INSTALLATION PROCEDURE 1. INSTALL CENTER CONTROL ABSORBER BRACKET LH (a) Install the center control absorber bracket with the 2 bolts. Torque: 29 N·m {296 kgf·cm, 21 ft·lbf} 2. INSTALL CENTER CONTROL ABSORBER BRACKET RH HINT: Use the same procedure ...

© 2016-2025 | www.to4runner.net

0.0096