Toyota 4Runner manuals

Toyota 4Runner: Correct driving posture

Drive with a good posture as follows:


1. Sit upright and well back in the seat. 2. Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required. 3. Adjust the seatback so that the controls are easily operable.

4. Adjust the tilt and telescopic positions of the steering wheel downward so the airbag is facing your chest.

5. Lock the head restraint in place with the center of the head restraint closest to the top of your ears. 6. Wear the seat belt correctly.

CAUTION

While driving

• Do not adjust the position of the driver’s seat.

Doing so could cause the driver to lose control of the vehicle.

• Do not place a cushion between the driver or passenger and the seatback.

A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.

• Do not place anything under the front seats.

Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an accident, resulting in death or serious injury. The adjustment mechanism may also be damaged.

Adjusting the seat position

• Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.

• Do not put your hands under the seat or near the moving parts to avoid injury.

Fingers or hands may become jammed in the seat mechanism.

Safety information
...

SRS airbags
The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce t ...

Other materials about Toyota 4Runner:

Open in One Side of CAN Branch Line
DESCRIPTION If 2 or more ECUs and/or sensors do not appear on the Techstream "CAN Bus Check" screen, one side of the CAN branch wire may be open (one side of the CANH [branch wire]/CANL [branch wire] of the ECU and/or sensor is open). ...

Terminals Of Ecu
TERMINALS OF ECU 1. CHECK NO. 1 AIR CONDITIONING AMPLIFIER ASSEMBLY (a) Disconnect the F42 No. 1 air conditioning amplifier assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. ...

© 2016-2021 | www.to4runner.net

0.0278