DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Data List.
(e) According to the display on the Techstream, read the Data List.
Main Body
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
---|---|---|---|
Key Unlock Warning SW |
Unlock warning switch / ON or OFF |
ON: Key inserted into ignition key cylinder OFF: Key not inserted into ignition key cylinder |
- |
ACC SW |
Ignition switch status / ON or OFF |
ON: Ignition switch ACC OFF: Ignition switch off |
- |
IG SW |
Ignition switch status / ON or OFF |
ON: Ignition switch ON OFF: Ignition switch off |
- |
RR Door Courtesy SW |
Rear RH side door courtesy light switch signal / ON or OFF |
ON: Rear RH side door open OFF: Rear RH side door closed |
- |
RL Door Courtesy SW |
Rear LH side door courtesy light switch signal / ON or OFF |
ON: Rear LH side door open OFF: Rear LH side door closed |
- |
Back Door Open |
Back door lock position status / Permit or Prohibit |
Permit: Back door unlocked Prohibit: Back door locked |
- |
Door Key SW-Lock |
Door key linked lock switch signal / ON or OFF |
ON: Driver side door key cylinder turned to lock position OFF: Driver side door key cylinder not turned |
- |
D-Door Key SW-UL |
Door key linked unlock switch signal / ON or OFF |
ON: Driver side door key cylinder turned to unlock position OFF: Driver side door key cylinder not turned |
- |
FR Door Lock Pos |
Front RH side door lock position switch signal / UNLOCK or LOCK |
UNLOCK: Front RH side door unlocked LOCK: Front RH side door locked |
- |
FR Door Courtesy |
Front RH side door courtesy light switch signal / ON or OFF |
ON: Front RH side door closed OFF: Front RH side door open |
- |
FL Door Lock Pos |
Front LH side door lock position switch signal / UNLOCK or LOCK |
UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
FL Door Courtesy |
Front LH side door courtesy light switch signal / ON or OFF |
ON: Front LH side door closed OFF: Front LH side door open |
- |
Hood Courtesy SW |
Security courtesy switch / ON or OFF |
ON: Engine hood open OFF: Engine hood closed |
- |
RR-Door Lock Pos SW |
Rear RH side door lock position switch signal / ON or OFF |
ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
RL-Door Lock Pos SW |
Rear LH side door lock position switch signal / ON or OFF |
ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
---|---|---|---|
Key Switch Operation Locked |
Tail gate control lock switch signal / ON or OFF |
ON: Back door key cylinder turned to lock position OFF: Back door key cylinder not turned |
- |
Key Switch Operation Unlocked |
Tail gate control unlock switch signal / ON or OFF |
ON: Back door key cylinder turned to unlock position OFF: Back door key cylinder not turned |
- |
Back Door Courtesy Switch |
Back door courtesy switch signal / ON or OFF |
ON: Back door open OFF: Back door closed |
- |
2. ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Main Body
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
---|---|---|---|
Security Indicator |
Security indicator |
ON/OFF |
The test is possible when the following conditions are met:
|
Vehicle Horn |
Vehicle horn(s) |
ON/OFF |
- |
Security Horn |
Security Horn |
ON/OFF |
- |
Power Supply Voltage Malfunction (C1882/82)
DESCRIPTION
The stabilizer control ECU recognizes the ignition switch ON signal based on
the voltage input to the IG terminal.
DTC Code
DTC Detection Condition
Trouble Area
C1882/82
The IG termin ...
GPS Mark is not Displayed
CAUTION / NOTICE / HINT
NOTICE:
After replacing the navigation receiver assembly of vehicles subscribed to pay-type
satellite radio broadcasts, registration of the XM radio ID is necessary.
PROCEDURE
1.
CHECK CABIN
(a) Ch ...