Toyota 4Runner: Diagnosis System
DIAGNOSIS SYSTEM
1. CHECK DLC3
(a) Check the DLC3 (See page .gif)
).
2. CHECK INDICATOR
(a) When a malfunction is detected in the Safety Connect system, the manual (SOS)
switch red indicator on the manual (SOS) switch illuminates to inform the driver
of the malfunction (See page ).
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK DCM (TELEMATICS TRANSCEIVER)
Text in Illustration
*a
Connector color: Blue
(to Telephone antenna)
*b
Connector color: Gray
...
Dtc Check / Clear
DTC CHECK / CLEAR
1. DTC CHECK/CLEAR (Using the Techstream)
(a) Check DTC:
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the f ...
Other materials about Toyota 4Runner:
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. CONNECT TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Start the engine and run it at idle.
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.
HINT:
Refer to the T ...
Shifting between H4L and L4L
Shifting from H4L to L4L
Stop the vehicle completely and
continue to depress the brake pedal.
Shift the shift lever to N.
Push the “UNLOCK” button and then push and turn the fourwheel drive control
switch to L4L.
Maintain this condition until t ...
0.1393