
Adjusting the settingsOn-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. CONNECT TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Start the engine and run it at idle.
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.
HINT:
Refer to the T ...
If you think something is wrong
If you notice any of the following symptoms, your vehicle probably needs
adjustment or repair. Contact your Toyota dealer as soon as possible.
Visible symptoms
• Fluid leaks under the vehicle (Water dripping from the air
conditioning after use is norm ...