Toyota 4Runner: Parking Brake System

Parking Brake Switch

Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the n ...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order ...

Other materials about Toyota 4Runner:

Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL 2. REMOVE SIDE STEP ASSEMBLY LH 3. REMOVE STABILIZER CONTROL VALVE PROTECTOR 4. DRAIN SUSPENSION FLUID 5. REMOVE LOWER FRONT BUMPER COVER 6. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 7. REMOVE F ...

Operation Check
OPERATION CHECK 1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK (a) Turn the ignition switch to ON. (b) Turn the headlight dimmer switch to the AUTO position. (c) Cover the automatic light control sensor. (d) Check that the taillights and low beam headl ...