Toyota 4Runner: Points to remember
Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat.
• Choose a child restraint system that suits your vehicle and is appropriate to the age and size of the child.
• For installation details, follow the instructions provided with the child restraint system.
General installation instructions are provided in this manual.
Child restraint systems
A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
The laws of all 50 states of the U.S.A. and Canada n ...
Types of child restraints
Child restraint systems are classified into the following 3 types according
to the age and size of the child:
Rear facing — Infant seat/convertible seat
Forward facing — Convertible seat
...
Other materials about Toyota 4Runner:
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 1 HEATER TO REGISTER DUCT
(a) Remove the 4 screws and No. 1 heater to register duct.
2. REMOVE NO. 2 HEATER TO REGISTER DUCT
(a) Remove the 4 screws and No ...
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE HOOD TO RADIATOR SUPPORT SEAL
(a) Using a clip remover, remove the 7 clips and hood to radiator support
seal.
NOTICE:
If the clips are damaged or fall off, replace them with new clips.
...
0.0154