Disposal
ComponentsOn-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. REMOVE FRONT WHEEL
2. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH
3. REMOVE FRONT DISC
4. INSPECT FRONT AXLE HUB BEARING LOOSENESS
(a) Using a dial indicator, measure the looseness near the center of
the ...
Diameter of the Tire is not Uniform (C1337)
DESCRIPTION
The skid control ECU measures the speed of each wheel by receiving signals from
the speed sensors. These signals are used for recognizing that all 4 wheels are
operating properly. Therefore, all wheel signals must indicate the same speed.
...