Brake (rear)
ComponentsOn-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. CONNECT TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Start the engine and run it at idle.
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.
HINT:
Refer to the T ...
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
(a) Disconnect the h1 multiplex network master switch connector.
(b) Measure the voltage and resistance according to the value(s) in the table
below.
HINT:
Measure the values on the wi ...